Tutorial written by : Zombie13
Last edited: July 30, 2003

Note before starting: If you have Windows 2000 or XP, make sure you have the Adaptec ASPI layer installed. It can be downloaded here.

You will need to install CDRwin v4.0. You can download this here, on the "Downloads" page.

Open CDRWin, and click the top-centre icon on the main screen (circled in red).

Click in the "Image Filename" box, and type in the location and filename of the bin/cue files you wish to create. Make sure the RAW option is checked, then click START.
This will now create the bin/cue files for use with PCSXbox.

The following Notepad section may not need to be done, but I did this anyway to make sure that the .cue file was OK...
Open the .cue file in notepad.

Notice that the filename includes the drive, in this case "D:\". Remove this part of the path/filename...

Click "File" then "Save" to save the changes.

These two files can now be FTPd to the Xbox.
This tutorial is very basic, but should be enough to help get PCSXbox running with your ISOs.