Dip switches X-ecuter2.0/2.1/2.2 Pro v0.03
www.xbox-scene.com

 

For X-ecuter 2.0 Pro

Switch 4 (Sw4) is used to enable/disable the modchip.

|Sw1|Sw2|Sw3| Bank Selected
|---|---|---|-----------------------------------------------------
| 0 | 0 | 0 | 1Mb Banks 1,2,3,4 (Flash Address 0x00000 - 0xFFFFF)
| 0 | 1 | 0 | 512k Banks 1&2 (Flash Address 0x00000 - 0x7FFFF)
| 1 | 1 | 0 | 512k Banks 3&4 (Flash Address 0x80000 - 0xFFFFF)
| 0 | 0 | 1 | 256k Bank 1 (Flash Address 0x00000 - 0x3FFFF)
| 1 | 0 | 1 | 256k Bank 2 (Flash Address 0x40000 - 0x7FFFF)
| 0 | 1 | 1 | 256k Bank 3 (Flash Address 0x80000 - 0xBFFFF)
| 1 | 1 | 1 | 256k Bank 4 (Flash Address 0xC0000 - 0xFFFFF)
or maybe easier to understand, this picture released by Team Xecuter :

For X-ecuter 2.1 and 2.2 Pro

Switch 4 (Sw4) is used to enable/disable the flashprotection.
The separated black switch is to enable disabled your modchip: if it's on the side of the blue/white switches the modchip is disabled, on the other side it's enabled.

|Sw1|Sw2|Sw3| Bank Selected
|---|---|---|-----------------------------------------------------
| 0 | 0 | 0 | 1Mb Banks 1,2,3,4 (Flash Address 0x00000 - 0xFFFFF)
| 0 | 1 | 0 | 512k Banks 1&2 (Flash Address 0x00000 - 0x7FFFF)
| 1 | 1 | 0 | 512k Banks 3&4 (Flash Address 0x80000 - 0xFFFFF)
| 0 | 0 | 1 | 256k Bank 1 (Flash Address 0x00000 - 0x3FFFF)
| 1 | 0 | 1 | 256k Bank 2 (Flash Address 0x40000 - 0x7FFFF)
| 0 | 1 | 1 | 256k Bank 3 (Flash Address 0x80000 - 0xBFFFF)
| 1 | 1 | 1 | 256k Bank 4 (Flash Address 0xC0000 - 0xFFFFF)